- Tue Jan 06, 2009 5:34 pm
#62861
Please be gentle, as this is the first thing I have ever designed/created in Eagle (thank you to those at SparkFun! especially those of you who created the Eagle guide - that is what taught me everything I know). Please find attached screenshots of the board, aswell as a zip containing the whole project. If you have any comments, suggestions, etc, please let me know!
EDIT Ive updated my board and schematic (havent figured out the whole polygon pour or upped the traces yet) but I fixed the ERC errors and (I think) simplified the traces and layout in general of the board
Project:
http://rapidshare.com/files/180873958/S ... d.zip.html
Original Schematic:
Here
My schematic:
![Image](http://img399.imageshack.us/img399/6456/schemav2.jpg)
Both:
![Image](http://img224.imageshack.us/img224/6530/bothrw1.jpg)
EDIT 2:
Tried doing a polygon pour for ground (still have lots of optimizing left to do!):
![Image](http://img235.imageshack.us/img235/2893/pourv13vk0.jpg)
EDIT Ive updated my board and schematic (havent figured out the whole polygon pour or upped the traces yet) but I fixed the ERC errors and (I think) simplified the traces and layout in general of the board
Project:
http://rapidshare.com/files/180873958/S ... d.zip.html
Original Schematic:
Here
My schematic:
![Image](http://img399.imageshack.us/img399/6456/schemav2.jpg)
Both:
![Image](http://img224.imageshack.us/img224/6530/bothrw1.jpg)
EDIT 2:
Tried doing a polygon pour for ground (still have lots of optimizing left to do!):
![Image](http://img235.imageshack.us/img235/2893/pourv13vk0.jpg)
Last edited by SpikedCola on Thu Jan 08, 2009 3:27 pm, edited 6 times in total.