SparkFun Forums

[MontanaTrout]

Help! Help! Help!

I got the GM862+GPS RS232 evl borad from SparkFun. I set up everything based on Doc. I download rsterm software. I power up the board and press the start btn, green light flash. I start rsterm set up flowcontrol to none and baudrate to 9600. port to com3. I use AotoDetect to test port. I got the following message "Modem(s) found on com3 unknown". I send AT got OK back. I sent AT+IPR=9600 got OK back. I sent AT+CMEE=2 got ERROR back and almost every other AT command has ERROR back.

I don't remeber what else I need check, Please help me!

Thanks,

[kenshin]

If you are using Rsterm autodetect and the Rsterm manage to detect your hardware meaning that is no problem with the connection.U better check what is the error code so that u can solve it.Is it CME error or CMS error what some other error?check out the AT command error list to solve this.