SparkFun Forums 

Where electronics enthusiasts find answers.

Have questions about a SparkFun product or board? This is the place to be.
By Gardeg
I know the required voltage for the Qwiic MP3 Trigger is 3.3v but could one squeeze by using 2 AA batteries (3V)?
User avatar
By sparky
Most likely yes. Going down in voltage is less of an issue than going up. Don't go more than 3.3V, but 2.8V, 2.6, 2.4V might even work. You begin to have various ICs become inoperable. I think the ATtiny84 and microSD can both go pretty low. Looks like the WT2003S is min of 3V but I wouldn't be surprised if it went lower just fine.

Of course, don't install this in a medical device, but for general use should work fine.