- Thu May 04, 2017 9:51 am
#194691
I made this full wave rectifier on my breadboard.All the 4 leds are lite up working.
I have a resister and cap on the output.When I hook up my oscilloscope it shows one
half wave.When I flip the leads I get one half wave upside down.
Don't know why I don't get full wave. It seems to be hooked up right. The ohms resister
is 220 and 1000 uf cap.
I have a resister and cap on the output.When I hook up my oscilloscope it shows one
half wave.When I flip the leads I get one half wave upside down.
Don't know why I don't get full wave. It seems to be hooked up right. The ohms resister
is 220 and 1000 uf cap.