- Mon Jan 21, 2008 3:58 pm
#41277
I'm having some problems talking to the BGB203 DIP Module over Bluetooth on a Mac. I followed the instructions here: http://todbot.com/blog/2006/02/23/howto ... rial-port/, and everything seemed fine up until the moment I connected to the module in ZTerm. Then a bunch of random ascii started streaming out in the terminal, and the device was (as far as I could tell) unresponsive to the '+++' and 'AT' commands. I'm pretty sure the electrical connections are as they should be (VDD->+3.3v, GND->GND, PIO4->GND), so I'm at a loss as to what's causing the weird behavior. Any ideas would be appreciated...