How do we hookup an antenna multiplexer to the Simultaneous RFID Reader (m6e-nano)?

All things pertaining to wireless and RF links

Moderator: phalanx

Post Reply
infimate
Posts: 1
Joined: Mon Sep 10, 2018 4:53 am

How do we hookup an antenna multiplexer to the Simultaneous RFID Reader (m6e-nano)?

Post by infimate » Mon Sep 10, 2018 5:09 am

The Jadaktech datasheet mentions that the m6e-nano can be hooked up to a 4 channel antenna multiplexer? Has anyone done this? What are the power considerations? What gpio pins in the sparkfun board should i connect the multiplexer (e.g. skyetek/skyeplus mxu 4 channel) to address the antennas.? Is it the pins labelled GPIO1 and LV2?

maxccarr
Posts: 1
Joined: Wed Nov 21, 2018 5:50 am

Re: How do we hookup an antenna multiplexer to the Simultaneous RFID Reader (m6e-nano)?

Post by maxccarr » Wed Nov 21, 2018 5:51 am

Did you ever figure out how to do this?
Cheers

ahuus1
Posts: 9
Joined: Wed Nov 28, 2018 8:21 am

Re: How do we hookup an antenna multiplexer to the Simultaneous RFID Reader (m6e-nano)?

Post by ahuus1 » Wed Nov 28, 2018 8:23 am

I would also be interested in if this is possible!

Thanks

Post Reply