How to associate/interconnect the schematics with .brd

How to associate/interconnect the schematics with .brd#163569

By rithi3 - Mon Sep 16, 2013 9:50 am

- Mon Sep 16, 2013 9:50 am #163569

Hello,

I wanted to do the panelization in Eagle. So I copied the latest .brd file which needs to be panelized in the same folder.Opened that. Selected the complete layout & copied that in the same .brd with equal spacing to make the panelization. Reference designators got incremented in each panel. Not the same refdes got copied.

I simply copied the .brd file in the same folder to make the panelization. So when I opened the .brd, schematics was not loaded.Now, I want to interconnect the schematics with .brd. Plz help me to do this. Thanks!!

Re: How to associate/interconnect the schematics with .brd#163598

By skimask - Mon Sep 16, 2013 9:01 pm

- Mon Sep 16, 2013 9:01 pm #163598

You lost me at Plz

I ignore "one post wonders".

Re: How to associate/interconnect the schematics with .brd#163610

By Ross Robotics - Tue Sep 17, 2013 3:36 am

- Tue Sep 17, 2013 3:36 am #163610

You are doing it the hard way, which I don't think will work anyway. You can use "panelize.ulp". It copies all the names to new layers so they don't change with the parts themselves. Then you just need to hide the original name layers, close the schematic window, and you can copy what's left. Change the CAM layers accordingly.

------------------------------------------------------------------------------------------------------------------------------------------------------------
//codlink
Available for circuit and PCB design, just PM me!

SparkFun Forums