SparkFun Forums 

Where electronics enthusiasts find answers.

All things pertaining to wireless and RF links
By szyss
#162802
Hello
I have two module RN42, firmware 6.15. No problem connect to Pc, and Nokia ld3w, but I can't connected two module together. I tried lots of options, like SA,0, SA,4, DCE, DTE, SPP
Configuration master:
***Settings***
BTA=000666603771
BTName=FireFly-3771
Baudrt(SW4)=9600
Mode =Mstr
Authen=4
PinCod=0000
Bonded=0
Rem=000666605726
***OTHER Settings***
Profile= SPP
CfgChar= $
SniffEna=0
LowPower=0
TX Power=0
IOPorts= 0
IOValues=0
Sleeptmr=0
DebugMod=0
RoleSwch=0

Configuration of slave:

***Settings***
BTA=000666605726
BTName=FireFly-5726
Baudrt(SW4)=9600
Mode =Slav
Authen=4
PinCod=0000
Bonded=0
Rem=NONE SET
***OTHER Settings***
Profile= SPP
CfgChar= $
SniffEna=0
LowPower=0
TX Power=0
IOPorts= 0
IOValues=0
Sleeptmr=0
DebugMod=0
RoleSwch=0

common configuration:
***ADVANCED Settings***
SrvName= SPP
SrvClass=0000
DevClass=1F00
InqWindw=0100
PagWindw=0100
CfgTimer=255
StatuStr=%
HidFlags=200
DTRtimer=8
KeySwapr=0

When I try connect C:
TRYING
%NEW_PAIRING
CONNECT failed


sorry for my bad english.


RN Technology Used : Bluetooth
RN FirmWare Used : 6.15 RN Subject : Connecting two module
RN Hardware used : PC
By aewoniuk
#173516
How is this project going? I have two RN42XV modules and my laptop. I am investigating this module and I have done a lot of work with XBees. This module at first try is very cryptic! I am trying to break through the the getting started phase. I am able to connect with a USB to XBee adapter to the laptop and configure the RN42XV. I have had problems connecting remotely to my modules with Windows 7. I am using Tera Term to communicate with the device. Sometimes the device will remotely connect however this happens only as a keyboard with th HID drivers...and its driving me crazy.

I you have experienced this and got around it, please give a clue or details! Thank you