I'm having this problem to get OpenOCD working with this JTAG adapter and hope someone would help.
I downloaded followings tar bundles and compiled them on a linux machine.
openocd-0.6.1 ( ./configure ----enable-ft2232_libftdi1
Running OpenOCD :
$ openocd -f interface/olimex-arm-usb-ocd-h.cfg -f target/cs351x.cfg Open On-Chip Debugger 0.6.1 (2013-04-15-21:39) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Error: The specified debug interface was not found (ft2232) The following debug interfaces are available: Runtime Error: /usr/local/share/openocd/scripts/interface/olimex-arm-usb-ocd-h.cfg:7: in procedure 'script' at file "embedded:startup.tcl", line 58 in procedure 'interface' called at file "/usr/local/share/openocd/scripts/interface/olimex-arm-usb-ocd-h.cfg", line 7
usb 1-3: new high speed USB device using ehci_hcd and address 12 usb 1-3: New USB device found, idVendor=15ba, idProduct=002b usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Olimex OpenOCD JTAG ARM-USB-OCD-H usb 1-3: Manufacturer: Olimex usb 1-3: SerialNumber: OLXXXXX usb 1-3: configuration #1 chosen from 1 choice
Any idea what could be wrong?