- Mon May 25, 2009 5:59 pm
#73517
Sharkbits, I have a wireless project using some cheap 433mhz modules to communicate and I got a pair of those TRF-2.4G to replace. I found your code here and got your demo working on the first try. Great job!
I was trying to get 2 home-made arduino to work with 3.3v and 8mhz, but then I gave up after some problems and used the exactly same setup you did with the mosfets. I used 2N7000 transistors when testing on a breadboard, and BSS138 on sort of a shield too. I also had problems compiling with 0014, so I'm using 0011.
So, thanks a lot for doing this and making it available... do you or anyone else have any more practical examples for real-world applications using your library? My circuit and code using those other modules was very straightforward and now I'm kinda lost on the best way to change it to these.
I was trying to get 2 home-made arduino to work with 3.3v and 8mhz, but then I gave up after some problems and used the exactly same setup you did with the mosfets. I used 2N7000 transistors when testing on a breadboard, and BSS138 on sort of a shield too. I also had problems compiling with 0014, so I'm using 0011.
So, thanks a lot for doing this and making it available... do you or anyone else have any more practical examples for real-world applications using your library? My circuit and code using those other modules was very straightforward and now I'm kinda lost on the best way to change it to these.