- Mon Feb 22, 2010 4:02 am
#94127
Hi JoeMaya,
sorry for the late reply i dont often check the forum
from what i can gather your levels are not correct, your must use a TTL - 232 convetor before feeding to the Prolific device a MAX232 should suffice, also make sure the power enabled line is connected
and you shouldnt need to ground the prolific
HTH
sorry for the late reply i dont often check the forum
from what i can gather your levels are not correct, your must use a TTL - 232 convetor before feeding to the Prolific device a MAX232 should suffice, also make sure the power enabled line is connected
and you shouldnt need to ground the prolific
HTH