- Fri Jul 17, 2009 11:27 pm
#77230
Hello,
Debugging works fine and is really fast with open ocd 0.2.0 but i got some warnings i do not know whats wrong.
The strangest one is: Verification will fail since checksum in image(0xe1a00000) written to flash was different from calculated vector checksum(0xa1b11eac).
What could be the reason for this warning?
thanks
mgiaco
Debugging works fine and is really fast with open ocd 0.2.0 but i got some warnings i do not know whats wrong.
The strangest one is: Verification will fail since checksum in image(0xe1a00000) written to flash was different from calculated vector checksum(0xa1b11eac).
What could be the reason for this warning?
thanks
mgiaco
- Open On-Chip Debugger 0.2.0 (2009-07-17-18:08) Release
$URL: http://svn.berlios.de/svnroot/repos/ope ... /openocd.c $
For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
30 kHz
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
Info : device: 4
Info : deviceID: 67358712
Info : SerialNumber: 32OZPDQCA
Info : Description: Amontec JTAGkey A
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
Info : JTAG Tap/device matched
target state: halted
target halted in ARM state due to breakpoint, current mode: Supervisor
cpsr: 0x60000013 pc: 0x40000070
30 kHz
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
Info : JTAG Tap/device matched
Warn : srst pulls trst - can not reset into halted mode. Issuing halt after reset.
target state: halted
target halted in Thumb state due to debug-request, current mode: Supervisor
cpsr: 0xa00000f3 pc: 0x7fffd2c0
requesting target halt and executing a soft reset
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0xa00000d3 pc: 0x00000000
1500 kHz
Info : accepting 'gdb' connection from 0
Warn : acknowledgment received, but no packet pending
30 kHz
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
Info : JTAG Tap/device matched
Warn : srst pulls trst - can not reset into halted mode. Issuing halt after reset.
target state: halted
target halted in Thumb state due to debug-request, current mode: Supervisor
cpsr: 0xa00000f3 pc: 0x7fffd2c0
requesting target halt and executing a soft reset
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0xa00000d3 pc: 0x00000000
1500 kHz
0xe01fc040: 00000001
Warn : Verification will fail since checksum in image(0xe1a00000) written to flash was different from calculated vector checksum(0xa1b11eac).
Warn : To remove this warning modify build tools on developer PC to inject correct LPC vector checksum.
Warn : memory read caused data abort (address: 0x742290e0, size: 0x4, count: 0x2)
Warn : memory read caused data abort (address: 0xfbffedfe, size: 0x1, count: 0x2)