- Thu Feb 12, 2009 9:19 am
#66013
Hello everybody, I'm back!
Now with a question... Have any of you ever work with CAN (Controller Area Network)? I've got a lot of doubts about it...
I'm working with a MCF51JM128 Freescale, it has a msCAN module...
One of my questions is about Identifiers... I want to plug the MCU, with a CAN Interface, to a CAN bus (from a car) and read EVERITHING... As I don't know about car's Protocol, I don't know the identifiers it uses.. So I want to setup the CAN bus so it won't check the identifier...
And if anyone could guide me through this project, maybe recommend me some bibliography or give me any advice it would be HUGELY appreciatted..
The CAN bus really shocked me, it's harder than I expected...
Well, thanks in advance, guys!
And please, one more time, excuse my English
Now with a question... Have any of you ever work with CAN (Controller Area Network)? I've got a lot of doubts about it...
I'm working with a MCF51JM128 Freescale, it has a msCAN module...
One of my questions is about Identifiers... I want to plug the MCU, with a CAN Interface, to a CAN bus (from a car) and read EVERITHING... As I don't know about car's Protocol, I don't know the identifiers it uses.. So I want to setup the CAN bus so it won't check the identifier...
And if anyone could guide me through this project, maybe recommend me some bibliography or give me any advice it would be HUGELY appreciatted..
The CAN bus really shocked me, it's harder than I expected...
Well, thanks in advance, guys!
And please, one more time, excuse my English
[i]Sebastian M. Irazabal
Electronic Engineer
Rosario, Santa Fe - Argentina[/i]
Electronic Engineer
Rosario, Santa Fe - Argentina[/i]