- Wed Jun 04, 2008 5:42 am
#49606
I want to use a TIL111 opto-isolator in a schematic but couldn't find a part in Eagle for it. The part seems easy enough to make, so I decided to do that.
If you look at the datasheet, page 1, there is a layout with information about the pins in this part. Inside the image of that part there is an infrared emitting diode and a phototransistor.
I was wondering how I can get these in my symbol. I couldn't find any information about that.
Thanks in advance!
JD
If you look at the datasheet, page 1, there is a layout with information about the pins in this part. Inside the image of that part there is an infrared emitting diode and a phototransistor.
I was wondering how I can get these in my symbol. I couldn't find any information about that.
Thanks in advance!
JD