This is going to sound stupid but bare with me.
I have designed a PCB for the GE863 and by mistake or my own inelegance i have connected the TX, RX_Trace pins to the NMEA GPS serial port instead of the Binary ports.
and i can't change this, neither i can connect a line to those pins since the pins are under the module.
Can i get the GPS data in some other way from the standard Serial that controls the module? or configure the Control mode to give me the GPS data from the NMEA port i have connected?
I need any way possible to get the GPS data out of the module from the Standard Serial port of the module.
Please help out.