SparkFun Forums 

Where electronics enthusiasts find answers.

Your source for all things Atmel.
By Martijn
Hi all,

With some nice components from Spark Fun Electronics, I build the following setup:
- Atmel Atmega168
- Nokia 6100 display
- SD card
- DS18B20 Temperature sensor
Because of the low memory capacity of the atmega168 are the fonts for the display located at the FAT16 formatted SD-card. That works really nice :)

Okay, that was the introduction. The problem now is the following; since I added the temperature sensor to the system, I've some troubles with the contrast of the display. I had those troubles even before I added the sensor, but a lot less then now.
I determined the parameters of the "VOLCTR"-setting by tuning them for my system. But now, after reprogramming the system a few times, the display turns white or black and I have to adjust the contrast-parameters to get the display back on track. Another thing is that the displays contrast is a bit "flickering". Does anyone have a solution for these problems?

Best regards,

long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]