- Mon Dec 11, 2006 2:18 pm
#23491
Guys,
I bought a few 20 pin tiny2313 and few mega168 (28 pin) processors, the corresponding olimex boards and both a usb jtag programmer and an isp programmer from sparkfun
http://www.sparkfun.com/commerce/produc ... ucts_id=12
http://www.sparkfun.com/commerce/produc ... ucts_id=14
I have used avrstudio 4, bascom avr and ponyprog and none of them recognise the chips or boards or give any indication that there is anything on the cable. I am using the serial programmer as the olimex borads do not have a JTAG interface.
Is there some voodo that I have to do. Are there ANY step by step instructions other than a brezzy "works with ponyprog".
Should I buy an stk500 or would that not help?
Thanks
Diarmuid
I bought a few 20 pin tiny2313 and few mega168 (28 pin) processors, the corresponding olimex boards and both a usb jtag programmer and an isp programmer from sparkfun
http://www.sparkfun.com/commerce/produc ... ucts_id=12
http://www.sparkfun.com/commerce/produc ... ucts_id=14
I have used avrstudio 4, bascom avr and ponyprog and none of them recognise the chips or boards or give any indication that there is anything on the cable. I am using the serial programmer as the olimex borads do not have a JTAG interface.
Is there some voodo that I have to do. Are there ANY step by step instructions other than a brezzy "works with ponyprog".
Should I buy an stk500 or would that not help?
Thanks
Diarmuid
Last edited by dwrenne on Mon Dec 11, 2006 3:49 pm, edited 1 time in total.