Where electronics enthusiasts find answers.
rpiloverbd wrote: ↑Sat Jan 15, 2022 8:45 am Hello, I think you have to make a full-wave rectifier. Have you done that?my problem is the type of the diode that i should use in the full wave rectifier now. How can i do those calculations, also how do I know the size of the capacitors to smoothen the output?
rpiloverbd wrote: ↑Sun Jan 16, 2022 9:47 am You can either build a bridge by using 1N4007 diodes, or directly can use a bridge rectifier IC like this one: https://drive.google.com/file/d/1YJdV4o ... 3KhPK/viewYour guidance was so amazing. I have fully implemented my project. Your video helped in the calculation of the capacitance required and selection of the best capacitors to use. I also came across another article about the full wave rectifier and how i should simulate it on proteus to confirm that actually it was a functional circuit. See the article on this link https://www.theengineeringprojects.com/ ... oteus.html
Regarding the capacitor, you may find this video helpful: https://www.youtube.com/watch?v=J9HsLWmtBnE
jremington wrote: ↑Sat Jan 15, 2022 11:19 am Did you find a 220 VAC to 85 VAC transformer, mentioned in your other post on the same topic?this transformer is the problem. I have not come across such a transformer and therefore am actually struggling too much with the project. Can a 240 vac to 110 vac transformer be an option?
https://forum.sparkfun.com/viewtopic.php?f=179&t=57050
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
