SparkFun Forums 

Where electronics enthusiasts find answers.

Your source for all things Atmel.
By nantizle
#15140
My company has a small C application ~5kb running in the obsolete '103L. We want to switch to the '128L, preferably running in 103 mode. We don't have any in-house coders and the previous consultant is not available.
We're located in N. California.

I read the AN080 app note (I'm not a coder) but we're stuck with some basic errors. Too long to get into here. Anybody out there who can provide helpful advice and possible consult, then I can go into details?

thanks
N
By stevech
#23074
nantizle wrote:My company has a small C application ~5kb running in the obsolete '103L. We want to switch to the '128L, preferably running in 103 mode. We don't have any in-house coders and the previous consultant is not available.
We're located in N. California.

I read the AN080 app note (I'm not a coder) but we're stuck with some basic errors. Too long to get into here. Anybody out there who can provide helpful advice and possible consult, then I can go into details?

thanks
N
I PM'd you on this. I'm in So Ca.