- Mon May 17, 2021 5:41 pm
#225967
Hi all, I have been trying to get the demos working with my Artemis Open Log and have had no luck at all. I'm assuming the micro OLED board is OK as it's brand new. I would have expected some sign of life when powering up but nothing. The demo sketches all compile OK but nothing happens on the OLED.
I recall when getting the Neo9 GPS board working I had to change a few things to get the I2C working so I'm wondering if there is something special I need to do the get it communicating with the micro OLED board.
I've checked that I'm getting 3.3V on the micro OLED board, not much else I can check. Unfortunately I don't have a "regular" Arduino board to test the micro OLED board out, this is actually my first foray into the world of Arduino.
Stu.
I recall when getting the Neo9 GPS board working I had to change a few things to get the I2C working so I'm wondering if there is something special I need to do the get it communicating with the micro OLED board.
I've checked that I'm getting 3.3V on the micro OLED board, not much else I can check. Unfortunately I don't have a "regular" Arduino board to test the micro OLED board out, this is actually my first foray into the world of Arduino.
Stu.
Stu Maxwell