Where electronics enthusiasts find answers.
Artemis SVL BootloaderIn my case slowing the baud rate down to 460800 did the trick
Target failed to enter bootload mode. Verify the right COM port is selected and that your board has the SVL bootloader.
frankus wrote:Update: installed the driver from here: https://github.com/adrianmihalko/ch340g ... l_V1.3.zipUnfortunately, that specific driver repo isn't in our CH340 guide: https://learn.sparkfun.com/tutorials/ho ... -need-them. Therefore, I can't distinguish if that is the issue or contributing to the issue. I would recommend clearing that driver out of your system and replacing it with the one listed in the guide, since we have tested that one, and possibly replacing your current RedBoard.
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
We have created lots of YouTube videos just so you can achieve [...]
The best flat phpBB theme around. Period. Fine craftmanship and [...]
All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]
this should be fantastic. but what about links,images, bbcodes etc etc? [...]