alternate spacing protoboard

Have a good idea for a new product for SFE or Olimex? Let us know!

Moderator: phalanx

Post Reply
hitsware
Posts: 25
Joined: Wed Dec 12, 2012 5:36 pm

alternate spacing protoboard

Post by hitsware » Tue Jul 28, 2015 1:29 pm

What the world needs is a protoboard with pad spacing suitable for:
https://www.sparkfun.com/products/9557
and the many other similar power chips
Or is there some I'm not aware of ?

darrellg
Posts: 324
Joined: Fri Oct 17, 2014 10:02 am
Location: Southern California

Re: alternate spacing protoboard

Post by darrellg » Tue Jul 28, 2015 2:39 pm

hitsware wrote:What the world needs is a protoboard with pad spacing suitable for:
https://www.sparkfun.com/products/9557
and the many other similar power chips
Or is there some I'm not aware of ?
Digikey and Mouser both sell perf boards with 50mil (0.05") spacing that would accommodate that part.

hitsware
Posts: 25
Joined: Wed Dec 12, 2012 5:36 pm

Re: alternate spacing protoboard

Post by hitsware » Wed Jul 29, 2015 11:54 pm

Thank You but .......Wow..!.... pricey !
Guess I'll stick with the breakout if needed ..

lyndon
Support Volunteer
Posts: 1595
Joined: Thu Jul 17, 2008 6:37 pm
Location: Minnesota, USA

Re: alternate spacing protoboard

Post by lyndon » Thu Jul 30, 2015 10:46 am

Didn't look at what the Digikey ones cost, but PCB manufacture is cheap these days. You could make your own protoboards and sell the extras.

Post Reply