- Fri Mar 20, 2015 5:26 am
#180541
Hi all!
I have a stock pile of stepper motors which we normally throw away. I'm wondering if I could use these for a CNC application. Probably overkill but thought I would get your opinions.
Amatek HS 200 2231 0300
Max V 75
Rated phase current 3A
Holding torque 231 oz-in bipolar
1.8° step angle
NEMA 23 mounting config.
Any help would be appreciated.
I have a stock pile of stepper motors which we normally throw away. I'm wondering if I could use these for a CNC application. Probably overkill but thought I would get your opinions.
Amatek HS 200 2231 0300
Max V 75
Rated phase current 3A
Holding torque 231 oz-in bipolar
1.8° step angle
NEMA 23 mounting config.
Any help would be appreciated.