- Mon Sep 30, 2013 4:12 am
#163990
I am using CrossWorks for developing my LPC2468 Project with Olimex ARM-USB-TINY H Target.
Installation of its driver had done properly.
Now I am testing my board by debugging a sample LPC2468 OEM PROJECT.I had build the project.
No error during build.
After that I performed the following step.
target->connect->Olimex arm-usb-tiny
Target connected successfully.
So I debug the project..But it is showing an error :: read failed -ARM7TDMI-S (0X4F1F 0F0F) on Olimex ARM-USB-TINY.
How to solve this issue?I changed JTAG clock divider to different values and checked it again.
But still same error...
Do I have to change any jumper settings on LPCe2468 Board?
Kindly Please reply...and help me..
Installation of its driver had done properly.
Now I am testing my board by debugging a sample LPC2468 OEM PROJECT.I had build the project.
No error during build.
After that I performed the following step.
target->connect->Olimex arm-usb-tiny
Target connected successfully.
So I debug the project..But it is showing an error :: read failed -ARM7TDMI-S (0X4F1F 0F0F) on Olimex ARM-USB-TINY.
How to solve this issue?I changed JTAG clock divider to different values and checked it again.
But still same error...
Do I have to change any jumper settings on LPCe2468 Board?
Kindly Please reply...and help me..