SparkFun Forums 

Where electronics enthusiasts find answers.

Everything ARM and LPC
By mattmast
Hi. I'm new here so I hope i'm posting in the right section, and I'm sorry if my english isn't perfect but I'm italian.

I have a LPC2103 that I use with eclipse. Until today I didn't have any problem, but now I can't start the debug because the console send me this error:


I use windows XP, and the tool-chain that I use is the one that you can download from amontec (sdk4arm).

Is there something that I can do to fix this problem?

User avatar
By leon_heller
Have you checked the connections? You might have a bad solder joint.

If they are OK, try another board. The JTAG I/F might be faulty, or you might have a bad chip.