- Thu Apr 19, 2012 10:15 pm
#143211
Hi there,
excuse my first post, I hope someone can help me solving this problem.
I have already configure my hid profile, but when i change to data mode and i try to enter hid codes in the hyper terminal to move the cursor up, or down, nothing happens.
My IWRAP version is 4.0.
My connections are like I explain here:
(Hyperterminal) PC----USB-Serial---->MAX3232------>WT32BreakoutBoard------>bluetooth------>PC
I don`t know if the data has to be written in other pin than rx, because this is working fine with SPP but it isn`t with the HID.
excuse my first post, I hope someone can help me solving this problem.
I have already configure my hid profile, but when i change to data mode and i try to enter hid codes in the hyper terminal to move the cursor up, or down, nothing happens.
My IWRAP version is 4.0.
My connections are like I explain here:
(Hyperterminal) PC----USB-Serial---->MAX3232------>WT32BreakoutBoard------>bluetooth------>PC
I don`t know if the data has to be written in other pin than rx, because this is working fine with SPP but it isn`t with the HID.