- Sun Mar 04, 2012 1:11 pm
#140657
Hello all,
I'm currently developing a RS-274X Gerber Viewer for the Android platform. I'm still in testing phase.
All my testing are performed with generated Gerber files from the CAM processor in CadSoft Eagle.
During the development of the application I found out that the Gerber file generated by Eagle aren't
100 % the smae as stated in the RS274X specification. There are some minor differences which matters
for how my application functionate.
That's why I asking for your help.To continue testing my application I need Gerber files generated
from a PCB layout editor other than CadSoft Eagle. You could be a great help if you sent me Gerber
files to the following email address: android.gerber.viewer[at]gmail.com
New app: Gerber Viewer
_
_
_
Greetings,
Duccan
I'm currently developing a RS-274X Gerber Viewer for the Android platform. I'm still in testing phase.
All my testing are performed with generated Gerber files from the CAM processor in CadSoft Eagle.
During the development of the application I found out that the Gerber file generated by Eagle aren't
100 % the smae as stated in the RS274X specification. There are some minor differences which matters
for how my application functionate.
That's why I asking for your help.To continue testing my application I need Gerber files generated
from a PCB layout editor other than CadSoft Eagle. You could be a great help if you sent me Gerber
files to the following email address: android.gerber.viewer[at]gmail.com
New app: Gerber Viewer
_
_
_
Greetings,
Duccan
Last edited by Duccan on Tue Nov 10, 2015 4:57 am, edited 7 times in total.