MSP430 Launchpad Socket

Discussions on how to get your MSP JTAG programmer up and running.

Moderator: phalanx

Post Reply
_hello_world.c
Posts: 1
Joined: Fri Oct 16, 2015 12:12 pm

MSP430 Launchpad Socket

Post by _hello_world.c » Fri Oct 16, 2015 12:22 pm

hello everyone, I am relatively new to microcontrollers and have a query about the msp430 launchpad device. I intend to power the msp430 device via a plug socket charger, I tested it and it works fine. But my question is that I intend on leaving the device plugged in via socket for 7 to 8 hours each day indefinitely. Are there any safety issues involved in this set up, any information would be greatly appreciated, thanks. :D

Post Reply