- Wed Jun 03, 2009 4:49 am
#74089
I have been using Olimex MSP430-4619LCD(based on MSP430F169 Micro) board since 2 months.
But recently I am unable to program/debug it through IAR workbench.
I am using the Olimex JTAG Tiny , and have checked that there is no problem with the JTAG(and the IAR workbench) as I was able to program another Olimex board through it.
It gives me the following error:
"Communication Error
Please connect the device and press retry to reconnect or cancel to abort"
and when I press retry then it shows the window with the message :
"Fatal Error: Failed to identify the device
Session Aborted"
Could you guys please help me as to what could be the problem?
Any link or hint as to what could be the prob shall be a great help.
Regards,
Pranay
www.pranaysharma.in
But recently I am unable to program/debug it through IAR workbench.
I am using the Olimex JTAG Tiny , and have checked that there is no problem with the JTAG(and the IAR workbench) as I was able to program another Olimex board through it.
It gives me the following error:
"Communication Error
Please connect the device and press retry to reconnect or cancel to abort"
and when I press retry then it shows the window with the message :
"Fatal Error: Failed to identify the device
Session Aborted"
Could you guys please help me as to what could be the problem?
Any link or hint as to what could be the prob shall be a great help.
Regards,
Pranay
www.pranaysharma.in