- Tue Jul 22, 2008 11:47 pm
#52416
Witch is the maximum DCO frequency that i can get on MSP430F1232 without using any external crystal? I found on user guide this commands
DCOCTL |= DCO0+DCO1+DCO2;
BCSCTL1 |= RSEL0+RSEL1+RSEL2;
They talking about setting the maxmimum DCO freq.
Also i try to mesure the freq on pin 25 (P1.4) but i get a wrong signal maybe from my usb programmer (MSP-FET430UIF) that never change.
Thanks
DCOCTL |= DCO0+DCO1+DCO2;
BCSCTL1 |= RSEL0+RSEL1+RSEL2;
They talking about setting the maxmimum DCO freq.
Also i try to mesure the freq on pin 25 (P1.4) but i get a wrong signal maybe from my usb programmer (MSP-FET430UIF) that never change.
Thanks