DHCP

Your source for all things Atmel.

Moderator: phalanx

Post Reply
AnshumanEDA
Posts: 1
Joined: Thu Jul 24, 2014 8:59 pm

DHCP

Post by AnshumanEDA » Thu Jul 24, 2014 9:06 pm

I have already implemented TCP/IP stack in my hardware board .It communicate well with PC and other hardware.Now I wish to expand the stack by writing C code to include DHCP protocol. So that my embedded node should be able to communicate with other PC or node through wireless router (Path ping facility)
Need help for Coding DHCP protocol

Mihir
R&D Engineer

stevech
Support Volunteer
Posts: 2907
Joined: Sat Jun 05, 2004 8:51 pm
Location: USA, California

Re: DHCP

Post by stevech » Mon Jul 28, 2014 8:44 pm

what IP stack? What NIC? A new/good Wiznet 820 like this...
http://www.wiznet.co.kr/sub_modules/en/ ... 0&pid=1161

DHCP in C can be found on the internet in many places. One that comes to mind is examples and demonstrations at

I recall seeing, and I have in my downloads archive, DHCP in C for the Wiznet 812 module. Roam around on
http://www.wiznet.co.kr/sub_modules/en/ ... wnload.asp

Post Reply