GPS controlled servo

Your source for all things Atmel.

Moderator: phalanx

Post Reply
asp128
Posts: 3
Joined: Sat Oct 26, 2013 1:20 pm

GPS controlled servo

Post by asp128 » Sat Oct 26, 2013 1:24 pm

I wish to move a servo motor to a particular angle on the basis of the altitude sensed by a gps unit. I am using an atmega 128 and a mediatek mt2239 gps unit. How do I go about writing the code?
I am completely new to avr.....
I also wish to log the gps data onto EEPROM or sd card.
Please guide....

skimask
Support Volunteer
Posts: 1244
Joined: Sun Nov 09, 2008 2:11 am
Location: Minot, N.D.

Re: GPS controlled servo

Post by skimask » Sat Oct 26, 2013 7:53 pm

1) Get an Arduino board and make it easy on yourself
2) Go to www.arduino.cc and read the documentation
3) Learn to blink an LED
4) Learn to move a servo
5) Learn to read serial NMEA data
6) Learn to read/write an SD card
7) Put them all together
8) http://www.catb.org/esr/faqs/smart-questions.html
I ignore "one post wonders".

Post Reply