- Mon Jul 03, 2006 7:51 pm
#15266
hello all,
i am working on a project that uses an avr and 74hct573 to activate a couple of relays. the motor that is activated on these relays will have a spike in current and level out at about 2 amps. what would be the best way to stop the motor if current goes over 2.5 - 3 amps. i have wrote all the code with bascom avr and everything works great just need a way to stop this thing if the current goes to high.
it is basically a protection if something is in the way of the part that is moving if the optical sensors dont see it
thanks
i am working on a project that uses an avr and 74hct573 to activate a couple of relays. the motor that is activated on these relays will have a spike in current and level out at about 2 amps. what would be the best way to stop the motor if current goes over 2.5 - 3 amps. i have wrote all the code with bascom avr and everything works great just need a way to stop this thing if the current goes to high.
it is basically a protection if something is in the way of the part that is moving if the optical sensors dont see it
thanks