- Sat Dec 25, 2010 12:00 am
#116089
Hello
There is example1(from 10) from basic code, in whille i will send here code for CDC and HID USB comunication. (For fun) . You can see what can you do with 1 led , 1 button and USB comunication. For USB communication related source you have to have USB add on and Bascom licence.
There is example1(from 10) from basic code, in whille i will send here code for CDC and HID USB comunication. (For fun) . You can see what can you do with 1 led , 1 button and USB comunication. For USB communication related source you have to have USB add on and Bascom licence.
Code: Select all
'----------------------------------------
'Vega Mini - Develop board
'Test tipke HWB(PE.2) in led diode (PE.3)
'----------------------------------------
$regfile = "usb1287.dat"
$crystal = 16000000
Porte = &B00000000
Ddre = &B00001000
Do
If Pine.2 = 0 Then
Reset Porte.3
Waitms 50
Set Porte.3
Waitms 50
Else
Reset Porte.3
Waitms 100
Set Porte.3
Waitms 100
End If
Loop
You do not have the required permissions to view the files attached to this post.