TinyIR™ Learning IR Remote Control Receiver firmware

Your source for all things Atmel.

Moderator: phalanx

Post Reply
cicero
Posts: 3
Joined: Wed Aug 11, 2010 2:47 am

TinyIR™ Learning IR Remote Control Receiver firmware

Post by cicero » Wed Aug 11, 2010 5:23 am

If someone could help me, to get firmware for this devise.
http://www.tauntek.com/tinyir-learning- ... ceiver.htm

There ware all what we need for assemble receiver exclude firmware.

Or for that analog device like that one
http://www.tauntek.com/tinyir2-learning ... ceiver.htm :roll:

stevech
Support Volunteer
Posts: 2907
Joined: Sat Jun 05, 2004 8:51 pm
Location: USA, California

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by stevech » Wed Aug 11, 2010 8:13 pm

send email to
rlgrieb@att.net

and ask for the .hex or source code. You may wish to explain your need and what hardware target you have in mind, if that hardware is not that which is sold by tauntek.com.

cicero
Posts: 3
Joined: Wed Aug 11, 2010 2:47 am

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by cicero » Wed Aug 11, 2010 11:35 pm

Ask for .hex code. I already assemble hardware which is sold by tauntek.com and need code.

Image

brainwav
Posts: 200
Joined: Sun Nov 06, 2005 1:53 pm

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by brainwav » Fri Aug 13, 2010 9:11 pm

Didn't they give you the already programmed chip with the kit?

stevech
Support Volunteer
Posts: 2907
Joined: Sat Jun 05, 2004 8:51 pm
Location: USA, California

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by stevech » Sat Aug 14, 2010 6:13 pm

perhaps the OP has a clone, hence the difficulty.

cicero
Posts: 3
Joined: Wed Aug 11, 2010 2:47 am

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by cicero » Mon Aug 16, 2010 1:43 am

brainwav wrote:Didn't they give you the already programmed chip with the kit?

I didn't buy the kit on tauntek.com, I assembled it myself.

brainwav
Posts: 200
Joined: Sun Nov 06, 2005 1:53 pm

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by brainwav » Mon Aug 16, 2010 1:31 pm

Did you email them and ask for the code? There's also a free arduino lib that does all this and more, of course you'd have to port it to PIC. I'm about to do this for a project, but making it a greatly simplified version.

http://www.arcfn.com/2009/08/multi-prot ... brary.html

Me.

pascal_sweden
Posts: 1
Joined: Tue Apr 10, 2012 2:09 pm

Re: TinyIR™ Learning IR Remote Control Receiver firmware

Post by pascal_sweden » Tue Apr 10, 2012 2:12 pm

Hello,

Did you use the libraries to make something similar as below?

http://www.tauntek.com/irmimic-learning ... mitter.htm

It should be single chip solution for IR learning and transmitting.

Their chip costs 10 USD which is way too much. I want similar chip but for max. 2-3 USD.

So I don't need the actual key pad, just an MCU interface to integrate in an electronic circuit.

The chip should operate in 2 modes: learn mode and playback mode.

The chip should be able to learn, and play back the stored IR pattern on demand.

Minimal 16 IR commands should be storable.

Regards,

/Pascal

Post Reply