- Mon Mar 02, 2009 5:17 pm
#67606
I have a data acquisition project which has a bottleneck at a parallel->serial shift over the USART, and I was wondering what the fastest baud rate anyone's gotten one of these to go in practice, assuming pretty much what all the chip does is load the USART transmit buffer and then prep its next batch of data while it waits for the buffer to clear.
I intend to use an asynchronous flow to the receiving device, and the receiver will be located very close to the transmitter.
I intend to use an asynchronous flow to the receiving device, and the receiver will be located very close to the transmitter.