Color QVGA 1.1" 128x96 programming in C

Color QVGA 1.1" 128x96 programming in C#64692

By hedie - Wed Jan 28, 2009 8:48 am

- Wed Jan 28, 2009 8:48 am #64692

Hello

I want you to aks how i can Initialize these Display: Color QVGA 1.1" 128x96

I need only the Sequence....

Thank you....

#64694

By FartingMonkey92 - Wed Jan 28, 2009 8:52 am

- Wed Jan 28, 2009 8:52 am #64694

This post-on may help you get started using an Arduino: viewtopic.php?p=56983&highlight=#56983

#64699

By hedie - Wed Jan 28, 2009 9:35 am

- Wed Jan 28, 2009 9:35 am #64699

Do you mean this source: http://unaligned.org/lcd128x96.c ?

When yes.... i have already viewed it.... but i dont know what i must transmitt...

I want to use the Display in SPI Mode....

This is my connecting plan

http://www.mikrocontroller.net/attachme ... enannt.JPG

can anybody take a look and give me a feedback?

#64708

By hedie - Wed Jan 28, 2009 11:32 am

- Wed Jan 28, 2009 11:32 am #64708

Ho must i connect my Display?

I have here my Connecting plan

http://www.mikrocontroller.net/attachme ... enannt.JPG

But i dont know what i must do with the R G and B pins....

Is it true, that i can Controll the hole Display over ISP (including Send Pictures etc....)

I Programm with C (Renesas H8 Controller)

I dont know how i can show whether the display understand my commands..... I dont know whether i have a connection bug....

What must i do with the DotCLK pin?

How can i set a Pixel? .... any pixel

Thank you

SparkFun Forums