- Tue Oct 02, 2018 7:31 am
#200545
I have an atmel ice an I have tried atmel studio 6.2 and 7. I have followed the pinout for the atmel ice correctly. I have the target device powered separately (servo trigger). I have followed the programming guide multiple times. I get a device signature and voltage in atmel studio. It appears that debugging mode Is starting properly.
The problem I have is that I need this to be a standard rotation servo trigger. The only servo triggers available for sale were continuous rotation. I bought the atmel ice to configure this option as mentioned in the programming guide. The dropdown in atmel studio does not show the servo operation options like the programming guide illustrates.
I would propose my questions now but it may be more effective to just listen to the feedback so please comment at will.
The problem I have is that I need this to be a standard rotation servo trigger. The only servo triggers available for sale were continuous rotation. I bought the atmel ice to configure this option as mentioned in the programming guide. The dropdown in atmel studio does not show the servo operation options like the programming guide illustrates.
I would propose my questions now but it may be more effective to just listen to the feedback so please comment at will.