- Thu Jun 06, 2013 9:48 pm
#160251
hi
haw to controll an hc-sr04 by one of the following atmel :
atmega328p and/or attiny2313 and/or at90s2313 ?
all the chip are 4mhz clocked by cerami resonator
so what is important haw to set correctly interrupt and timing parameter
thanks
haw to controll an hc-sr04 by one of the following atmel :
atmega328p and/or attiny2313 and/or at90s2313 ?
all the chip are 4mhz clocked by cerami resonator
so what is important haw to set correctly interrupt and timing parameter
thanks