SparkFun Forums 

Where electronics enthusiasts find answers.

Discussions on the software and hardware for Atmel's STK standard.
By bamboosamurai
#140439
I am using the Teensy++ 2.0 for my prototype application, and now I am at the point where I need a custom controller designed. I have no schooling in this field and I have learned everything at home, and due to a busy work schedule I am unable to design one myself.

This is what I need:

* The same controller "AT90usb1286"
* To be able to continue to program it through the Arduino IDE.
* It can be pretty much the same as the Teensy++ 2.0 but a wee bit smaller "width"
* I need to be able to attach a tact switch to the back/center
* Two mounting on each side

Any help is GREATY appreciated.
By stevech
#140461
Seems like a lot of difficulty and cost for a new board when the one you mention is close.
A professional to design, lay out, fab, test a new board will cost a great deal. You are ready for this?