SparkFun Forums

[benny]

Hi,

Can anyone tell me where to connect the signal from pin3/5/7 (U1) to ?
I assume it is pin 5 of the ICP but I'm not sure.

http://www.olimex.com/dev/pdf/avr-pg2b.pdf

-benny

[Jun]

You are right. A signal from pin3/5/7 of U1 is reset and should be connected to pin 5 of ICP.

[cbhargava]

How would one program Tiny11 using avr-pg2b. Documentation says that it programs all avr microcontrollers.

Thanks