- Sat Jan 31, 2004 10:42 pm
#566
I am just starting out with the atmega128
this is what i plan to use:
1) avr-gcc tool chain
2) UISP software programmer
3) A populated ATMega128 Mini Header Board from Sparkfun
4) Parallel Port Dongle Programmer for STK Port from Sparkfun
My questions are :
1) Is the "Parallel Port Dongle Programmer for STK Port from Sparkfun" actually the same as the AVR-ISP programmer available from atmel?
2) Is the "Parallel Port Dongle Programmer for STK Port from Sparkfun" compatible with the ATMega128 Mini Header Board from Sparkfun ?
3) Can i program the "ATMega128 Mini Header Board" with UISP software using the "Parallel Port Dongle Programmer for STK Port from Sparkfun" ?
4)Can i burn a bootloader into the "ATMega128 Mini Header Board" with the "Parallel Port Dongle Programmer for STK Port from Sparkfun" ?
Thankyou
this is what i plan to use:
1) avr-gcc tool chain
2) UISP software programmer
3) A populated ATMega128 Mini Header Board from Sparkfun
4) Parallel Port Dongle Programmer for STK Port from Sparkfun
My questions are :
1) Is the "Parallel Port Dongle Programmer for STK Port from Sparkfun" actually the same as the AVR-ISP programmer available from atmel?
2) Is the "Parallel Port Dongle Programmer for STK Port from Sparkfun" compatible with the ATMega128 Mini Header Board from Sparkfun ?
3) Can i program the "ATMega128 Mini Header Board" with UISP software using the "Parallel Port Dongle Programmer for STK Port from Sparkfun" ?
4)Can i burn a bootloader into the "ATMega128 Mini Header Board" with the "Parallel Port Dongle Programmer for STK Port from Sparkfun" ?
Thankyou