- Mon May 01, 2017 4:56 pm
#194640
Is there a defined minimum barrel clearance?
I'm looking for a minimum guaranteed clearance between any two barrels (but not necessarily barrel and haybales/side.)
I understand that there's no guaranteed "straight path" though, which is fine, but I need to know how much space there is to maneuver. I'd hope for at least 3 feet clearance ring around each barrel. (Clearance rings may overlap, but the distance between any two barrels would be at least 3 feet.)
Separately, is there a specification of how "rough" the "wall climbing" ramp will be?
What will be the maximum depth of crevices, and maximum/minimum length of span of crevices, and minimum/maximum width of elements?
Or, if this is "glue stuff to a flat board," what are the dimensions of the cross sections of those things?
I'm looking for a minimum guaranteed clearance between any two barrels (but not necessarily barrel and haybales/side.)
I understand that there's no guaranteed "straight path" though, which is fine, but I need to know how much space there is to maneuver. I'd hope for at least 3 feet clearance ring around each barrel. (Clearance rings may overlap, but the distance between any two barrels would be at least 3 feet.)
Separately, is there a specification of how "rough" the "wall climbing" ramp will be?
What will be the maximum depth of crevices, and maximum/minimum length of span of crevices, and minimum/maximum width of elements?
Or, if this is "glue stuff to a flat board," what are the dimensions of the cross sections of those things?