SparkFun Forums 

Where electronics enthusiasts find answers.

Have a good idea for a new product for SFE or Olimex? Let us know!
By jasonharper
#3476
Would anybody have a use for a breadboard-compatible PIC10Fxxx development board? I just had a couple made via the $2.50 PCB offer. It's a 1" x 0.7" board, with an ICD2 modular jack at one end, and a 6-pin header at the other to plug into a breadboard. And in the middle, if you look very, very closely, there's the PIC!
Image
If there's interest, I'd be happy to allow Spark Fun to use my PCB design.
User avatar
By sparky
#3503
Beauty! Thanks for the invite. I will try to get a product with your name on it within our breakout board section.

On a side tangent. The 10F has had a slow start. Does anyone have any fun application examples with this pepper sized micro?

-Nathan
By John Meacham
#3550
Something I was thinking of was an LED cube.
http://www.toddholoubek.com/projects/ledpage/

with one PIC soldered directly to each LED and just 3 wires needed for any number of LEDs. (rather than a rats nest of cables).