LiPo Battery Pack / Multi-Cell Balancers~Chargers
Posted: Mon Feb 13, 2017 10:18 am
Why only a single Balancer-Charger for LiPo batteries in your store?
The unit should be capable of a minimum of FOUR CELLS as a maximum, EIGHT CELLS would be good. - many D-I-Y projects use 19-24V packs.
It would be a good project for your range of components, too. Only the PCB would be required as a new item.
The unit should be capable of a minimum of FOUR CELLS as a maximum, EIGHT CELLS would be good. - many D-I-Y projects use 19-24V packs.
It would be a good project for your range of components, too. Only the PCB would be required as a new item.