Page 1 of 1

alternate spacing protoboard

Posted: Tue Jul 28, 2015 1:29 pm
by hitsware
What the world needs is a protoboard with pad spacing suitable for:
https://www.sparkfun.com/products/9557
and the many other similar power chips
Or is there some I'm not aware of ?

Re: alternate spacing protoboard

Posted: Tue Jul 28, 2015 2:39 pm
by darrellg
hitsware wrote:What the world needs is a protoboard with pad spacing suitable for:
https://www.sparkfun.com/products/9557
and the many other similar power chips
Or is there some I'm not aware of ?
Digikey and Mouser both sell perf boards with 50mil (0.05") spacing that would accommodate that part.

Re: alternate spacing protoboard

Posted: Wed Jul 29, 2015 11:54 pm
by hitsware
Thank You but .......Wow..!.... pricey !
Guess I'll stick with the breakout if needed ..

Re: alternate spacing protoboard

Posted: Thu Jul 30, 2015 10:46 am
by lyndon
Didn't look at what the Digikey ones cost, but PCB manufacture is cheap these days. You could make your own protoboards and sell the extras.