Robust Sealed Enclosure

Have a good idea for a new product for SFE or Olimex? Let us know!

Moderator: phalanx

Post Reply
Posts: 1
Joined: Sun Sep 14, 2014 10:14 am

Robust Sealed Enclosure

Post by sailMi » Sun Sep 14, 2014 10:31 am

So I have been working on my first Arduino project and was really surprised that there aren't many good choices for environmentally sealed enclosures that allow you to connect sensors that are external to the enclosure. So I have a proposal for a product idea.

There is already a great relatively low cost enclosure out on the market by Cinch called the ModICE. All parts are in stock at mouser and total 38.51 for the enclosure, header, and a connector. The only missing piece is the PCB board. I propose you make a PCB board to fit this enclosure. ... enclosure/

I think the best layout would be to connect the external connector header to a "prototyping area". Then have an area for one or two Nano footprints and one or two Uno foot prints. The buyer would have to handle the interconnects between the areas, but maybe you could make it "easy" to put together a standard configuration connecting the controller, shields, prototyping area, and external header. ... S%20-E.pdf

Support Volunteer
Posts: 1641
Joined: Thu Jul 17, 2008 6:37 pm
Location: Minnesota, USA

Re: Robust Sealed Enclosure

Post by lyndon » Sat Sep 27, 2014 7:30 am

I don't understand what you mean. There are literally thousands of NEMA4/IP66 sealed enclosures on the market that you could fit an Arduino into.

User avatar
Ross Robotics
Support Volunteer
Posts: 2007
Joined: Thu Jun 07, 2012 9:33 pm

Re: Robust Sealed Enclosure

Post by Ross Robotics » Sat Sep 27, 2014 7:58 am

This seems more like spam to me..
Available for circuit and PCB design, just PM me!

Post Reply