question regarding best way to set-up rf module

Have a good idea for a new product for SFE or Olimex? Let us know!

Moderator: phalanx

Post Reply
angel_prints_198
Posts: 1
Joined: Wed Jul 07, 2004 3:41 pm

question regarding best way to set-up rf module

Post by angel_prints_198 » Thu Jul 08, 2004 4:50 pm

hi! i'll be using 3 rf klpa transmitter-receiver pairs for wireless communication between 2 mobile robots and a computer. i'm just wondering if anyone can suggest the best way to do the interface... i thought of having a max233 level translator for the pc's t-r pair (5v goes to receiver) but i will also place an amplifier before the transmitter for optimum range... then for the tr pairs of mobots (microcontroller i'll be using is motorola 68hc11a1), i'll connect an amplifier before the transmitter for the same reasons... if anyone has any ideas, please e-mail me... if possible, even the schematics... i just really need to do it as soon as i can... any help will be gratly appreciated... btw, my e-mail add is: angel_prints_198@yahoo.com

thank you very much!!!

Post Reply