SparkFun Electronics Forum

Hi,

I am developing a product and looking for a Electrical Engineer. Please contact me if you are experienced EE and have the time to work on a small project of mine.

You have the experience to design and develop a PCBA for a powerbank charger for mobile devices.
- it should work with LiPo batteries (2x 10000mAh)
- has a PCB (SFF) with build in controller;
1) 2x USB A type connectors
2) DC male connector for input (adapter AC100/230 - DC5/12)
3) RTC + LCD display
4) support DC output USB 5-6V, 1.5A and 2.4A to charge the most common smartdevices
5) I need your advice for other components
Compensation for this project I offer €20 an hour with max of 20hours

For my second project I need an EEE with experience in the RF era of GPS, LoRaWAN, WiFi, BLE, RFID and ODB-II. For this project I am looking to build a prototype of o device used in the car. I will post detail for this in a other topic.

Please send your interest ith your resume and reference to pclw221 hotmail dot com

Thanks

DJ

A hotmail email address?
Who does that?

skimask wrote:A hotmail email address?
Who does that?

My mother?

-Bill

experienced EE

...

I offer €20 an hour

boggle