- Sat Nov 14, 2015 4:37 pm
#185940
Here's a little project I did a while back, to use the MicroView as a piece of sound-sensitive jewellery, using all parts from Sparkfun.
(Sorry for the crappy photos)
Board:
Populated with a BOB-09964 and powered off of a PRT-13112. I've also tested it with a plain 9V battery.
With MicroView, running this sketch:
Proof-of-concept choker:
(Sorry for the crappy photos)
Board:
Populated with a BOB-09964 and powered off of a PRT-13112. I've also tested it with a plain 9V battery.
With MicroView, running this sketch:
Proof-of-concept choker: